This is a new MSD 6201 Digital 6A Ignition Control Box. The MSD 6A Ignition Control set the standards that other ignitions strive to reach. For 2011, the bar has been raised even higher as we introduce the all new Digital...
This is a new MSD 6201 Digital 6A Ignition Control Box
The MSD 6A Ignition Control set the standards that other ignitions strive to reach. For 2011, the bar has been raised even higher as we introduce the all new Digital 6AL ignition Control!
MSD started with a clean slate and drew up plans for an all new housing. We kept the same footprint as the traditional 6AL but lowered the profile for a sleek look. The wiring is all routed out one end of the unit through a sealed and locking connector. This eases installation and keeps your wiring looking neat and clean.
Inside the Digital 6A you’ll find a microprocessor that monitors and controls every firing. The circuits are updated with efficient components that help the ignition produce more power while drawing less current! In fact, the new Digital 6A deliver over 530 volts to the coil with up to 135mJ of spark energy – for every firing! Increased output combined with MSD’s proven multiple spark series is a win-win situation!
The new Digital 6A is supplied with the wiring harness and the components you’ll need for installation. The ignitions are compatible on 4, 6 or 8-cylinder engines with 12-volt, negative ground electrical systems. They’ll accept trigger inputs from breaker points, amplifiers and magnetic pickups.
Features; * Higher output with 530 primary volts and 135mJ of spark energy * Efficient components use less current to produce more power * Same bolt pattern as the original 6AL with a lower profile housing * Built-in LED for system checks * All wires exit the same side through a locked, sealed connector * Compatible for 4, 6 or 8-cylinder engines
Specs; Spark Energy: 135-145 mJ per spark Primary Voltage: 520-540 Volts Secondary Voltage: 45,000 Volts Spark Series Duration: 20 degree Crankshaft Rotation RPM Range: 15,000 RPM with 14.4 Volts Voltage Required: 12-15 Volts, 7 Volt Start Current Draw: .7 Amp per 1,000 RPM Weight and Size 1.7 lbs., 8"L x 4"W x 1.825"H
Recommended Items; MSD 8200, 8202, 8203, 8223 or 8207 Blaster coil.
Towers Racing Products is a Speed Shop Located in Texas. We have over 525 performance equipment manufacturers to chose from. If you don't see it here and need assistance, please contact us at Sales at Towers Racing com or 512.859.1320 We’re very competitive on price, stock a large in house selection of parts and a wide variety of aluminum AN fittings and hose ends from -3 to -20. We also carry Braided Steel, Black Light Weight Nylon and Push-on hose in 3’, 15’, 20’ and 100’ foot lengths to compliment our fittings. Call or Email any requirement questions before purchasing our hose and fittings.
We ship orders to most countries worldwide, approximately 190 allowable. The international shipping and handling fee for this item will be displayed under the shipping tab above. Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying. We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior.
Availability or quantity shown on our site, for any of our new parts, is the price we are selling the described item for. Not always in stock when ordered as stock changes daily with our retail showroom and daily shipments. Please call us to check stock if you need them ASAP or any special shipping arrangements. We ship 2 times a week (Tuesdays & Fridays) so be sure to contact us if you need them sooner.
Most of our manufacturers performance parts are not direct replacement parts for OEM parts. Many may NOT fit your application as original OEM if any previous modifications to your application have been made. Some applications might need some modifications. Please Submit Any Questions before purchase of any Performance/Racing parts offered.
OFF-ROAD ONLY ITEMS: Some items sold and/or manufactured by TRP are not CARB approved for sale, installation, and street use in the states of California, New York, New Jersey, and Oregon. In these states, such items are legal for use on racing vehicles only which may never be operated on public highways. Some items sold and/or manufactured by TRP are 50 state CARB approved for use on public highways. However, you should check your local laws before ordering and installing any questionable items.
PERFORMANCE CONSUMER'S BILL OF RIGHTS: Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Maguson Moss Warranty Act (15 U.S.C. 2302(C)). For best results, consider working with performance-oriented dealerships with a proven history of working with customers. If your vehicle manufacturer fails to honor emission/warranty claims, contact EPA at (202) 260-2080 or www.epa.gov. If federal warranty protection is denied, contact the FTC at (202) 326-3128 or www.ftc.gov. For additional information, check Goggle for; Consumers Bill of Rights, What you can do if Your Warranty Is Denied, Federal Warranty Laws, Vehicle Manufacturer Warranty Contact Phone Numbers.
Upon purchase of any item, International buyers shall assume all & total responsibility of item due to loss or damage claim, once delivered to US Postal authorities by courier service through Towers Racing Products. TRP will NOT be responsible for any claim or loss due to negligence by any Postal Authority or agent thereof. The total cost of shipping / handling / insurance and courier service for International Customers are based upon final destination and rates set by Postal Authorities.
New parts carry a 90 day warranty on workmanship & defects. Some products carry a longer warranty through the manufacturer THERE IS A 10% RE-STOCKING FEE FOR ALL RETURNS. MUST HAVE A RGA # BEFORE RETURNING. ONLY NEW ITEMS ARE ELIGIBLE FOR RETURN. The Warranty on new items is through the Manufacturer and you must follow their protocol for exchange/return. Buyer pays all freight charges to return regardless of reason. NO Returns on Fabricated covers or Special Order parts.
Above Pictures are to show style, type or color. Not always exact photo of part for sale. Parts may not be in factory original package to save you money on shipping. Sellers are not responsible for shipping service transit times. Transit times may vary, particularly during peak periods.
Sign In
