This is a brand new MSD 8207 Blaster SS High Performance Coil. Don’t let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In...
This is a brand new MSD 8207 MSD Blaster SS High Performance Coil. Don’t let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps with a maximum voltage output of 40,000 volts!The secondary windings are wound on a segmented bobbin which reduces the chance of voltage breakdown between the primary and secondary windings. For more protection, these windings are encased in a polyurethane compound for complete protection against vibration. The Blaster SS features brass terminals and a sturdy Rynite housing. It is supplied with a 90° boot, terminal and vibration mounts. A great addition to CD Ignitions and some stock applications.
Features; Improved output coil for electronic ignitions, and MSD Ignitions Efficient winding design and assembly creates a compact housing Primary and secondary windings are encased in Ciba polyurethane 70:1 turns ratio and lower primary resistance produce high voltage output Dupont Rynite housing with a tall tower and brass primary terminals CARB E.O. Approved
Specifications; Turns ratio: 70:1 Primary resistance: .355 OHMs Secondary resistance: 4.4K OHMs Inductance: 6.9 mH Maximum voltage: 40,000 Volts Peak current: 300 mA Spark duration: 220 uS Weight: N/A
Replacement Items; 3311 - Silicone 90° Spark Plug Boots & Terminals 3331 - Coil 90° Boot & Terminals 8214 - Coil Ballast Resistor 0.8 ohm
Towers Racing Products is a full service Speed Shop Located in Texas with a retail Showroom, Installation & Fabrication Shop. We have over 525 performance equipment manufacturers to chose from. If you don't see it here and need assistance, please contact us at Sales at Towers Racing com or 512.859.1320 We’re very competitive on price, stock a large in house selection of parts and a wide variety of aluminum AN fittings and hose ends from -3 to -20. We also carry Braided Steel, Black Light Weight Nylon and Push-on hose in 3’, 15’, 20’ and 100’ foot lengths to compliment our fittings. Call or Email any requirement questions before purchasing our hose and fittings.
We ship orders to most countries worldwide. The International shipping and handling fee for this item will be displayed under the eBay shipping tab above. Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying. We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior.
Availability or quantity shown on our site, for any of our new parts, is the price we are selling the described item for. Not always in stock when ordered as stock changes daily with our retail showroom and daily shipments. Please call us to check stock if you need them ASAP or any special shipping arrangements. We ship 2 times a week (Tuesdays & Fridays) so be sure to contact us if you need them sooner.
Upon purchase of any item, International buyers shall assume all & total responsibility of item due to loss or damage claim, once delivered to US Postal authorities by courier service through Towers Racing Products. TRP will NOT be responsible for any claim or loss due to negligence by any Postal Authority or agent thereof. The total cost of shipping/handling/insurance and courier service for International Customers are based upon final destination and rates set by Postal Authorities.
New parts carry a 90 day warranty on workmanship & defects. Some products carry a longer warranty through the manufacturer THERE IS A 10% RE-STOCKING FEE FOR ALL RETURNS. MUST HAVE A RGA # BEFORE RETURNING. ONLY NEW ITEMS ARE ELIGIBLE FOR RETURN. The Warranty on new items is through the Manufacturer and you must follow their protocol for exchange/return. Buyer pays all freight charges to return regardless of reason. NO Returns on Fabricated covers or Special Order parts.
Most of our manufacturers performance parts are not direct replacement parts for OEM parts. Many may NOT fit your application as original OEM if any previous modifications to your application have been made. Some applications might need some modifications. Please Submit Any Questions before purchase of any Performance/Racing parts offered.
Above Pictures are to show style, type or color. Not always exact photo of part for sale. Sellers are not responsible for shipping service transit times. Transit times may vary, particularly during peak periods. On Jul-25-11 at 20:19:21 PDT, seller added the following information:
Sign In
